Key Features Solid Carbide Build This cutter is made from solid carbide, not just carbide tipped. That matters when you are making repeated Domino mortises and need a bit that holds its edge under heavy use. 5 mm Domino Fit...
Solid Carbide Build This cutter is made from solid carbide, not just carbide tipped. That matters when you are making repeated Domino mortises and need a bit that holds its edge under heavy use. 5 mm Domino Fit The 5 mm cutting diameter is sized for small loose tenon joinery work. It is a practical choice for narrower stock, lighter assemblies, and clean slot routing on the Festool DF500 platform. Built for Domino Machines This CMT domino joiner bit is made specifically for Domino jointing machines and is listed for use with the Festool DF500. The correct M6 x 0.75 mm shank helps you get the right fit without guessing.
The CMT 380.050.11 Compatible with Domino Jointing Machine by Festool DF500 – Solid Carbide Bit, 5mm (13/64-Inch), M6x0.75mm Shank is a replacement cutter bit for loose tenon joinery. This is a domino joiner cutter bit designed for routing 5 mm slots in solid wood and wood composites. Model Number: 380.050.11. If you run a Festool DF500 and need a dedicated 5 mm cutter for accurate mortises, this is the part that does that job.
The core numbers here are straightforward and useful: a 5 mm cutting diameter, 20 mm cutting length, and 49 mm overall length. In real use, that means the bit is sized for smaller Domino joinery work where you want controlled, clean mortises without overcutting the stock. The spiral cut design and two flutes are there for a reason: they help the bit cut efficiently and clear material as it plunges into the workpiece.
CMT builds this bit from solid carbide, which is the big story. On a cutter like this, material matters because it directly affects edge life, heat resistance, and how well the bit keeps cutting clean after repeated plunges. Supplementing that, CMT also lists a black PTFE coating that helps reduce residue buildup and overheating. That is not just a spec sheet detail. On repetitive joinery work, less buildup means more consistent cutting and less time stopping to clean the cutter.
The bit also features a center point along with two cutting edges and two spiral flutes. That combination is meant to support controlled entry into the material and stable cutting through the full mortise. For cabinet parts, face frames, trim assemblies, and smaller furniture components, that control is what helps keep the slot where you want it and the joint fitting the way it should.
Compatibility is clearly defined. This bit is listed for use on Domino machines and specifically calls out the Festool DF500. The shank thread is M6 x 0.75 mm, which is one of the fitment details you do not want to get wrong when ordering a replacement cutter. If you are replacing a worn 5 mm DF500 cutter or keeping a spare on hand so the machine never sits idle, this is the information that matters.
This is not a general-purpose straight router bit for a handheld router table setup. It is a machine-specific joinery accessory for Domino-style slot cutting. That makes it a better fit for woodworkers, finish carpenters, cabinet installers, and serious DIY users already working in the Festool Domino system. If you own the DF500 and regularly cut 5 mm mortises, this is the kind of replacement part worth having before you need it, not after the current cutter is already dull.
If you are cutting slots for 5 mm loose tenons, this bit is built for that exact work. It is aimed at joinery where a clean-fitting mortise matters more than brute-force stock removal.
A replacement cutter needs to do more than fit the machine. It has to stay sharp, manage heat, and keep cutting consistently when you are making repeated mortises in a run of parts.
| Cutting Diameter | 5 mm (13/64 in) |
|---|---|
| Cutting Length | 20 mm (25/32 in) |
| Overall Length | 49 mm |
| Shank Thread | M6 x 0.75 mm |
| Cut Type | Spiral Cut |
| Number of Flutes | 2 |
| Material | Solid Carbide |
| Weight | 0.05 kg |
Machine Compatibility Listed for use with Festool Domino jointing machine DF500. Mounting Interface Uses an M6 x 0.75 mm shank thread. Material Use Designed for routing slots in solid wood and wood composites.
Woodworking Cabinetry Finish Carpentry Furniture Building Loose Tenon Joinery Solid Wood Wood Composites DF500 Users
If you use 5 mm Domino tenons regularly, keep a fresh cutter on hand before your current one starts burning or packing chips. On joinery work, a sharp bit usually shows up first in cleaner mortise walls and easier final fit.
Limited Lifetime Warranty as outlined on page 23 in the 2007 CMT price list.
Tool Nut’s Take
This is a machine-specific joinery bit that keeps things simple: correct fit, solid carbide construction, and the dimensions that matter for repeatable 5 mm Domino mortises.
There are no reviews yet.
Shopping Over $40 you will get 100% free shipping
