Shop

Key Features

Zero-Clearance CuttingThe DEWALT 59-in. TrackSaw Track (DWS5059) rides tight against your cut line for straight, splinter-free results on longer panel cuts.Dual-Sided DesignBoth edges are zero-clearance, so you can cut in either direction without repositioning the track.Sized for Full-Height SheetsAt 59 inches, this track handles the height of a standard 4×8 sheet in one pass.

Overview

This is a 59-in. track saw guide rail for DEWALT’s TrackSaw cutting system (DWS5059), replacing DEWALT’s earlier DWS5022 track under a new model number with the same zero-clearance, dual-edged design.

The zero-clearance edge sits directly on the cut line, working as a built-in splinter guard so plywood, MDF, and hardwood cut clean without chip-out on the top face.

Because both edges are usable, there’s no need to flip or reposition the rail for cuts running the opposite direction, which speeds up repetitive rip cuts.

At 59 inches, this track is sized for full-height cuts on standard 4×8 sheet goods in a single setup, making it a common choice for cabinet shops and anyone breaking down full sheets regularly. It can also join with a second track via a connector for longer rips.

Key Specifications

Compatibility

Track Saw PlatformFor use with DEWALT TrackSaw-compatible saws (sold separately)Track ConnectorJoins with a second track for longer cuts

Tool Nut’s Take

Tool Nut’s Take

The Full-Sheet Workhorse Track

This is the length most cabinet shops reach for first long enough for a full sheet, short enough to still be manageable solo.

• Who it’s for: Cabinet installers and anyone breaking down 4×8 sheet goods on a regular basis.
• Why it stands out: Dual-sided zero-clearance edges cut clean in both directions without repositioning.
• Worth knowing: Track only the saw and any connecting hardware are sold separately.